top of page
GRADE X-1 INGOT
Grade X-1 ingots have the same extremely low carbon (typically less than .008% carbon), and low manganese (typically less than .15% manganese) as Grade X1 CP and Grade X1. Like Grade U thin plate, Grade U cut plate and Grade X1, it is an excellent source of iron units for the production of all stainless steel grades especially type L grades in air and vacuum melt induction furnaces. Grade X1 ingots are available in various large sizes 8” or 9” thick with widths and lengths as ordered (up to 40 inches or more). The X1 ingots can also be supplied with lifting lugs welded on to facilitate charging into furnaces. The chemistry of all Grade X1 ingots are heat certified
TYPICAL CHEMISTRY
We have our own spectrometer in house and test our material methodically to ensure exacting specifications. Our loads are heat certified.
Title | Value |
|---|---|
C | 0.003 |
Mn | 0.0136 |
P | 0.008 |
S | 0.012 |
Si | 0.005 |
Cu | 0.027 |
Ni | 0.01 |
Cr | 0.013 |
Mo | 0.002 |
Sn | 0.002 |
Al | 0.05 |
N | 0.0005 |
V | 0.0018 |
B | 0.00005 |
Ca | 0.00035 |
Ti | 0.073 |
C | Mn | P | S | Si | Cu | Ni | Cr | Mo | Sn | Al | N | V | B | Ca | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.003 | 0.0136 | 0.008 | 0.012 | 0.005 | 0.027 | 0.01 | 0.013 | 0.002 | 0.002 | 0.05 | 0.0005 | 0.0018 | 0.00005 | 0.00035 | 0.073 |
SIZING
Typical sizing of Grace X-1 Ingot is 8" x 10" x 32" long but can be cut to alternate sizes.
SHIPPING
Grade X-1 Ingot is stacked and banded in wodden pallets.
bottom of page