top of page
x-1ingot better.jpg

LOW CARBON HIGH PURITY IRON INGOT (GRACE X-1 INGOT)

Grade X-1 ingots have the same extremely low carbon (typically less than .008% carbon), and low manganese (typically less than .15% manganese) as Grade X-1, UCP and Grade U. Like Grade U thin plate, Grade U cut plate and Grade X-1, it is an excellent source of iron units for the production of all stainless steel grades especially type L grades in air and vacuum melt induction furnaces. Grade X1 ingots are available in various large sizes 8” or 9” thick with widths and lengths as ordered (up to 40 inches or more). The X-1 ingots can also be supplied with lifting lugs welded on to facilitate charging into furnaces. The chemistry of all Grade X1 ingots are heat certified

TYPICAL CHEMISTRY

We have our own spectrometer in house and test our material methodically to ensure exacting specifications. Our loads are heat certified. 
Title
Value
C
0.003
Mn
0.0136
P
0.008
S
0.012
Si
0.005
Cu
0.027
Ni
0.01
Cr
0.013
Mo
0.002
Sn
0.002
Al
0.05
N
0.0005
C
Mn
P
S
Si
Cu
Ni
Cr
Mo
Sn
Al
N
V
B
Ca
Ti
0.003
0.0136
0.008
0.012
0.005
0.027
0.01
0.013
0.002
0.002
0.05
0.0005
0.0018
0.00005
0.00035
0.073

SIZING

Typical sizing of Grace X-1 Ingot is 8" x 10" x 32" long but can be cut to alternate sizes.  

SHIPPING

Grade X-1 Ingot is stacked and banded in wodden pallets. 
finalpackaging.jpg
bottom of page